6" Zinc Hose Mender Threads_NPSH Also used with standpipes systems

Also used with standpipes systems and fire pumps

The female threads on this hose will connect to a 1 1/2 inch PVC or NPT metal pipe

National Pipe Tapered is common in plumbing and some industrial uses

The opening starts at the top with a 1/2" x 1/2" square and tapers to 9/16" x 9/16" square at the bottom of the opening

3 inch NH / NST fittings measure approximately 3 5/8"

6" Zinc Hose Mender Threads_NPSH Also used with standpipes systemsThe hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or